Problems of hospital lighting

       Hospital as a place to heal the wounded and rescue the dying and need to create a spacious and comfortable atmosphere, clean, quiet environment, in order to give full play to the function of hospital, directly or indirectly impact on health. Therefore lighting needs of different options depending on the functions of hospital departments and medical staff in many cases must be through observation and determine the disease in patients with skin appearance, to make correct diagnosis, so in addition to ensure normal lighting for 24 hours, the examination room lighting should meet the low color temperature, high color color requirements; hall lighting use simple fluorescent lighting to promote the patient to have the safety of emotion; emergency room lighting and the examination room requirements are basically the same, at the same time, we should pay full attention to the light source color and should meet the needs of local small surgical lighting; therefore, any situation, hospital special attention is restricted to the glare. Because the hospital must ensure 24 hours of normal lighting, no holidays throughout the year, and the high demand for lighting, LED as a new light source, easy to meet the requirements of the hospital almost harsh lighting, its energy saving transformation potential.

Project advantage

1, environmental protection and energy saving: no mercury, no pollution, no ultraviolet radiation. Under the same brightness, LED than the energy-saving lamps as high as 50%;

2, high efficiency: the use of imported LED chip, the luminous efficiency of lamps up to 90Lm/W;

3, a small decline, the average service life of 50000 hours. The average attenuation of 6000 hours is 10.8%, far lower than the national standard;

4, the recovery of the cost of rapid: less than half a year after the transformation to recover the cost;

5, color temperature range: can provide almost any color, but also can provide the red, green and blue (RGB), even a kind of any color of light;

6, color index is high: the color index is greater than 80, to ensure the true reduction;

7, the installation is simple, safe and reliable: the external power supply isolation, just take down the original fluorescent lamp for LED fluorescent lamp and remove the original ballast and starter, on both ends of the lamp tube have no access to city high voltage, only less than 36V safe DC voltage, the danger of electric shock does not exist.  

Summary: in addition to the initial investment of more than 60 yuan *1000 =60000 support;

Annual maintenance cost savings of 9000 yuan +1200 yuan =10200 yuan, 157680 yuan per year to save electricity;

See the transformation of less than half a year to recover the cost of it;

After the annual light can also save costs 167880 yuan.

Recommend the use of universal light LED lamps

       Universal light LED lamp energy saving up to 80% above, life is more than 10 times the ordinary lamp, almost maintenance free, there is no need to frequently replace the lamp tube, a ballast and a starter, about 6 months to 1 years time saving costs can be in exchange for the cost. Green environmental protection type of semiconductor light source, light and soft, pure spectrum, it is conducive to the protection of personnel and physical health. 6000K cold light source to give people a sense of cool visual, is conducive to focus on the spirit, improve work efficiency.

       At present, incandescent lamp life is 1000 hours; fluorescent lamp life is 6000 hours; LED lamp life is 50000-100000 hours; under the same brightness conditions, than incandescent energy saving more than 80%, compared with fluorescent lamp energy saving 50%.

         LED panel light as a tall on the lighting lamps, widely used in offices, business places, hotels, hotels, department stores, hospitals and other high-end indoor lighting places.
         So, whether it is from the energy saving and replacement maintenance or from the lighting effects, the use of universal light LED lamps are on the election.

Popularization of product characteristics of light LED panel light:

1, energy saving, compared to the traditional grid lamp disk to save 55%-70% electric energy, and the brightness is higher;

2, the leading power design, long service life;

3, instant start, no glare, no flicker, no beep;

4, simple and stylish appearance, beautiful and generous, never change;

5, does not cause excessive infrared or ultraviolet radiation and professional heat management design;

6, aviation aluminum frame, the special configuration of the PMMA lamp shade;

7, the side light even soft, comfortable and bright, to ease the eye fatigue, light emitting angle wider;

8, ultra thin, fine circuit design, single LED lamp damage does not affect the overall luminous effect and long service life;

9, no mercury, lead free and other harmful substances harmful to the human body as well as the environment;

10, the installation is quick and convenient, can replace the same specifications of the ceiling or grille lamp hanging on the wall, or through the chain hanging in the roof;

11, 5000 hours after the 1/1000 lumen, 5000 lumen, service life of up to 50000 hours or more;

12, the voltage is not stable in the case of constant current drive can still ensure the normal operation of the panel light;

13, the product has passed UL, TUV, CE certification.

Installation methods are as follows:   1) embedded type   2) lifting type   3) ceiling type   4) embedded type.